Steel

Structural Steel:beam

  • Equal Leg Angle – 1/2″ x 1/2″ x 1/8″ – thru 8″ x 8″ x 3/4″
  • Unequal Leg Angle – 2″ x 1 1/2″ x 1/8″ – thru 8″ x 6″ x 3/4″
  • Bar Channel – 1″ x 1/2″ x 1/8″ – 2″ x 1″ x 3/16″
  • Junior Channel – 8″ x 8.5lb – thru 12″ x 10.6lb
  • Structural Channel – 3″ x 4.1lb – thru 12″ x 30lb
  • Flat Bar – 1/8″ x 1/2″ – thru 1 1/2″ x 12″
  • Hot Round Bar – 1/4″ – thru 2″
  • Cold Round Bar – 3/16″ x thru 4″
  • 4140 TGP Round Bar – 1/2″ – thru 4″
  • Hot Square Bar – 3/8″ – thru 2″
  • I Beam – 3″ x 5.7lb – thru 12″ x 31.8lb
  • Wide Flange Beam – 4″ x 13lb – thru 24″ x 68lb

Pipe and Tubing:pipe

  • Black Plane End – 1/2″ Sch. 40 – thru 14″ x .500
  • Galvanized Plane End – 1″ Sch. 40 – thru 6″ Sch. 40
  • Square Tube – 1/2″ x .060 – thru 10″ x .500
  • Rectangular Tube – 1 1/2″ x 1″ x .120 – thru 14″ x 6″ x .375
  • Round Tube ERW – 1″ x .095 – thru 2″ x .095
  • 4130 Chrome Moly – 3/8″ x .058 – thru 1 5/8″ x .058
  • Surplus Pipe – 8″ x .250 – thru 42″ x .375

Sheet Product:

  • Hot Roll – 10 Ga. – thru 16 Ga.
  • Cold Roll – 18 Ga. – thru 24 Ga.
  • Galvanized – 10 Ga. – thru 24 Ga.
  • Stainless – 10 Ga. – thru 24 Ga.

Plate Product:Prime-Hot-Rolled-Steel-Angle

  • A36 Mild Steel – 3/16″ – thru 4 “
  • A572 Grade 50 – 1/4″ – thru 1″
  • Abrasion AR 500 – 3/16″ – thru 1″
  • Impact T1 – 3/16″ – thru 1″
  • Floor Plate (Diamond) – 1/8″ – thru 3/8″